Filter By:
- Parts & Accessories (409)
- Wheels (242)
- Hubs (140)
- Rims (148)
- Spokes (19)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
$101.99
- Heat-treated axle for improved strength
- Angled flanges for lateral stability in wheel building
- Rear hubs include a 4-pawl cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Axle: 14mm, 3/8-inch
- Material: Alloy
- Drilling: 36
$8.49 - $25.49
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
$57.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Rear
- Gears: Flip/flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
$6.49
Replacement parts for Micro C-Drive Hubs.
- Supplier Part: Replacement #16 Clutch Ring
$33.99
Replacement axles for Black Ops MT-3100 hubs. Bearing shoulder to bearing shoulder is 59mm.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-M37F
- MPN: 370685
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 175mm
- Supplier Part: KT-M98R
- MPN: 370686
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$143.99 - $144.99
Shimano Alfine Center Lock Dynamo Front Hub
- Compatible with 26 to 28-inch wheel sizes
- Light alloy QR lever and nut
- 6V, 3.0W output
- Centerlock rotor mount
- Spoke Interface: J-Bend
- Weight: 575g
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$75.95
- Gusset's bestselling BMX, dirt jump and street use wheels
- Black Dog 32mm 6061 alloy double wall rims with loose-ball alloy hubs, black spokes
- Flip/flop freewheel threaded rear
- Heat treated CrMo axle with room for pegs
$18.95
- Non-quick release design for added security
- Alloy anchor nut includes Anti-Spin tab which prevents unwanted turning of nut when tightening or loosening the hex through-bolt
- XL version compatible with thicker dropouts (up to 10mm thick)
- Torque to 7 N
- Wheel: front/rear
- Spacing (front/rear): 100/135mm
- Shaft: Chromoly
$25.95
- Replacement pawls and springs for DJD Bush Drive rear are for original DJD or DJD-Bush Drive rear hub
- Replacement pawls and springs for Spin Doctor 6-Drive are compatible with all 6-Drive hubs
- Replacement pawls and springs for Supa Drive are compatible with all Supa Drive hubs
- Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible
- DJD and DJD-BD parts are generally not cross compatible
$40.00
Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors.
- Beautifully machined and hand-friendly
- Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter
- More than just eye candy, they’re hand candy, as well
- Weight: 44g
$69.99 - $73.99
- Grade 3 balls and magnetite rust proof finish
- Abec 5 precision and silicone w seals
- 3 times cryogenic race treatment
- Bearings sold individually, not as pair
$19.99
• 5mm skewer set (F+R hubs)
• Standard 5mm Hex release
• Black or Silver anodized finish
• Chromoly axles
$41.99
• 5-sided key locking skewer set
• Chromoly axles
• 6061 anodized aluminum
• Includes seat and F+R wheel skewers
• 95g (set)
$4.89 - $6.09
- Replacement adjustable nut for three-speed internal hubs.
$24.19
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$11.99
- Variable widths
- Left: 35mm
- Center: 52mm
- Right: 39mm
- Length: 126mm
- Overall: 147mm
$2.79 - $3.79
Replacement Axle nuts for three speed Sturmey Archer hubs.
$349.99
Give 'em your worst
Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability.
Rough And Rowdy
Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready.
Balance is Key
Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life.
No Frills, All Thrills
The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.
$8.95
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types.
- Easily snaps over your rims
- Stretchy, tightly woven material provides a close fit and protects from abrasion
- Sold as a pair
- Not for tubeless set up
$48.50 - $65.00
Product specs:
- Size:24", 26", 29"
- Width:33.5
- Bead width: 33.5mm
- Inner bead width: 26mm
- Section height: 25.5mm
- Weight (26"): 660g
- Sleeved or welded
- Hole count: 32, 36
$104.99 - $109.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness.
- Offset nipple bed for improved spoke tension balance and wheel strength/stiffness
- Strong tire retention bead
- Tubeless ready
$47.50
Product specs:
- Size:24", 26"
- Width:31mm
- Bead width: 31mm
- Inner bead width: 24mm
- Section height: 22.5mm
- Weight (26"): 630g
- Sleeved or welded
- Hole count: 32, 36
$40.95
Replacement axle and end cap for 2-piece rear disc road hubs
- Retains original 12mm thru-axle set-up
$169.99
- The next generation in SPANK’s mountain bike rims with a built in vibration damping system.
- Low sectional profile height and high width adds radial compliance while keeping high lateral stiffness and torsional strength.
Features
- Radially Compliant Gravity Rim with Vibrocore
- Oohbah Inverted Inner Wall, BeadBite anti-burp
- Optimized for DH, FR, and Heavy Enduro
- Tubeless Ready